Lucent Technologies Comcode 108678723 manual Screen 3-5 displays

DEFINITY ECS Release 8.2 ATM Installation,	Issue 1
Upgrades, and Administration 555-233-124	April 2000

5Administering ATM-PNC and ATM-CES

		Administering DEFINITY ECS			5-15
Table 5-8. ATM-CES administration —
	√	Step	Action	Description
		27.	Verify channel	Go to screen 2; Screen 5-7 displays.
			settings	Depending on the settings in step 18:
				■	If Circuit Type field is set at T1, then channel 24 is
					populated.
				■	If Circuit Type field is set at E1, then channel 16 is
					populated.
				Other details about D-channels:
				■ All ports for one signaling group must be on the same
					ATM circuit pack (the same circuit pack that the D
					channel is on).
				■ The D-channel port is never assigned to a trunk group.
					Because they are all the same, the administrator does
					not need to type in the circuit pack location for each
					channel.
				■ No port can be assigned to more than one signaling
					group.
		28.	Type port numbers	Add the port numbers (minimum of 6) from the
				port-to-channel mapping on signaling group screen 2.
				See ‘‘Changing the port-to-channel mapping’’ on page 5-22
				if you need to change any administration.
				When finished, press Enter to save the administration.
		29.	Administer the trunk	Type add trunk-grouptrkgrpnbr and press Enter.
			group	Screen 3-5 displays.