Chapter 6 Embroidering
Thread Breakage Sensor
The sensor for thread breakage can be turned ON/OFF or the sensor sensitivity for each needle bar can be set.
The sensitivity can be set within the range of 1 - 100. The smaller the value is, the higher the sensitivity is.
1.Select [Thread Breakage Sensor] from Setting menu.
2.Click the head you want to disable the sensor and remove the check mark ( ).
3.Adjust the sensor sensitivity.
The sensor sensitivity for each needle bar is adjusted individually.
All sensor sensitivities for all needle bars are adjusted simultaneously.
4.Click [OK].
158 |
