Chapter 2 Preparation of Embroidery Machine
For embroidering with tubular square hoop (middle position)
t
Pin
u
e
w
q
r
Lower by 1 mm
y
1.Attach four hexagon socket head cap screws to each of F table parts R q, M (2 pcs) w, and L e from the back.
2.Mount the F table parts from L e in order. Insert the bent part (lower) of F table guide UN r into the guide. Insert the F table rear pin into the hole of F table stopper N t.
3.Adjust F table supports F y in height so as to make the F table parallel with the floor.
4.Tighten all hexagon socket head cap screws u firmly.
33 |
