132 C H A P T E R F I F T E E N
Radio Interference (For 220-240 V Model Only)
This apparatus complies with EN55022 (CISPR Publication 22)/Class B and EN55024.
For Your Safety
To ensure safe operation the
The fact that the equipment operates satisfactorily does not imply that the power is grounded and that the installation is completely safe. For your safety, if in any doubt about the effective grounding of the power, consult a qualified electrician.
IEC 825 Laser Class
CLASS 1 LASER PRODUCT.
Disconnect device
The equipment must be installed near the socket outlet which must be easily accessible.
IMPORTANT
If the socket outlet is not compatible with the mains plug as fitted, then remove the plug from the mains cord and fit an appropriate three pin plug. If the replacement plug is intended to take a fuse then fit the same fuse as the original.
If a moulded plug is severed from the power cord then it should be destroyed because a plug with cut wires is dangerous if plugged into a live socket outlet. Do not leave it where a child might find it.
In the event of replacing the plug fuse, fit a fuse approved by ASTA to BS1362 with the same rating as the original fuse.
Always replace the fuse cover. Never use a plug with the cover omitted.
WARNING - THIS MACHINE MUST BE PROPERLY EARTHED.
The wires in the supplied main cord are the following colours:
Green and yellow: Ground
Blue:Neutral
Brown:Live