Brother FAX-8350P owner manual Installing the Software/Drivers under Windows for MFC-9650

S E T T I N G U P T H E M A C H I N E A N D C O M P U T E R T O W O R K T O G E T H E R 111

2Attach the Filter core, pressing until you hear a click, between the Parallel Interface connector and the Cable tie.

Filter Core Cable Tie Filter Core

to MFC	Double shielded
	Parallel I/F cable

Installing the Software/Drivers under

Windows® for MFC-9650

All the software and drivers are supplied on a single CD. An Auto-Install program will guide you through most of the installation process.

1Make sure that your machine is connected to your computer and that the machine is switched on.

2Turn your computer on and start Windows® .

3Insert the CD-ROM into your CD-ROM Drive. Windows® 95/98/NT4.0 will be detected automatically, and if possible the Auto- Installer will run automatically. If the Auto-Installer does not run after a few seconds, you can run it by:-

A)Click the START button and then select RUN from the Start Menu.

B)Type X:\SETUP.EXE” [where X is your CD-ROM Drive] in the command line box.

C)Click on OK.

YOU CAN EXIT FROM THE AUTO-INSTALLER AT ANY TIME BY CLICKING ON THE ICON IN THE BOTTOM RIGHT HAND CORNER OF YOUR SCREEN.