Brother FAX-8350P For Fax/Tel F/T Mode Only, Changing Remote Codes, To change Remote Codes

48 C H A P T E R F I V E

For Fax/Tel (F/T) Mode Only

When the machine is in Fax/Tel (F/T) Mode, it will use the F/T Ring Time (F/T pseudo-ringing) to alert you to a voice call. If you’re at the machine, you can lift the external telephone’s handset and press Tel to answer.

If you’re at an extension phone, you’ll need to lift the handset during the F/T Ring Time and press # 5 1 between the F/T pseudo-rings. If no one is on the line, or if someone wants to send you a fax, send the call back to the machine by pressing 5 1.

Changing Remote Codes

Remote Codes might not work with some telephone systems. The preset Activation Code is 5 1. The preset Deactivation Code is # 5 1.

If you are always disconnected when accessing your external TAD remotely, try changing the Activation Code from 5 1 to # # # and the Deactivation Code from # 5 1 to 1 1 1. You cannot use the same number for the Activation Code and the Deactivation Code.

To change Remote Codes

1For the FAX-8350P, Press Menu, 2, 4.

For the MFC-9650/FAX-8750P, Press Menu, 1, 2, 4.

2Press or to select ON (or OFF).

REMOTE ACT.:ON

SELECT { } & SET

3Press Set when the screen displays the setting you want.

4If you want to, enter a new Remote Activation Code, then press Set.

ACT.CODE:*51

ENTER & SET

5If you want to, enter a new Remote Deactivation Code, then press

Set.

DEACT.CODE:#51

ENTER & SET

6Press Stop to exit.