S E T U P S E N D | 67 |
| |
|
|
5Press Help/Broadcast or Broadcast.
6Enter the next fax number.
Example: Manual dialling, using the dial pad.
7Press Start.
Your machine will read the documents into memory and then start sending faxes to all the numbers you entered.
■To stop the broadcasting in progress, press Stop. The display asks if you want to cancel all locations or just the location that is being sent to.
■Enter the long dialling sequence numbers as you normally would, but keep in mind that each key counts as one location, so the number of locations you can call becomes limited.
■If the line is busy or a connection could not be made for some other reasons while broadcasting, the machine will redial the number automatically.
■If the memory is full, press Stop to abort the job or press Start to send the portion that is in the memory (if more than one page has been scanned).
■When Broadcasting using a Group, Real Time TX needs to be set to OFF.
Multiple Resolution Transmission
Use this feature to select separate resolution settings for each page of the fax you’re sending. This could be useful if you’re sending a fax with photos and letters, or some pages with small print and others with normal print. Resolution settings return to STANDARD after the fax is sent.
1Insert documents in feeder, then
for the
for the
2Use 
or 
to select resolution for page 1, then press Set.
3Repeat Step 2 for subsequent pages. Press Stop when you’re finished. The screen displays
ACCEPTED
NEXT
1.YES 2.NO
4Press 1 if you want to select additional settings. The display returns to the SETUP SEND menu.
5Enter the fax number you’re calling, and press Start.
