Brother FAX-8350P Dual Access, Real Time Transmission, Real Time TX, Real Time Txon Select & SET

58 C H A P T E R S I X

Dual Access

You can scan up to 50 messages into the fax memory, even while the machine is receiving or sending another fax (from the memory). You can set temporary settings for each fax you’re scanning, except Timer and Polling.

If you get a MEMORY FULL message while scanning the first page of a fax press Stop to cancel a scan. If you get a MEMORY FULL message while scanning in a subsequent page, you’ll have the option to press Start to transmit the pages scanned so far, or to press Stop to cancel the operation.

1Make sure the document feeder is empty.

2Place the document in the feeder.

3Enter the fax number.

4Press Start. The machine starts scanning the document and the screen displays the job number (#XX) of the fax, and how much memory is available. When the machine starts dialling you can immediately repeat Steps 1 through 4 for the next fax.

Real Time Transmission

When Memory is full, the machine cannot continue to scan documents into memory before sending. However, you can turn on REAL TIME TX. Then place the documents in the feeder and enter the fax number.

As soon as the phone line is free, the machine starts dialling and sending the fax.

1Place the document in the feeder.

2For the FAX-8350P, Press Menu, 3, 9.

For the MFC-9650/FAX-8750P, Press Menu, 1, 3, 9. The screen displays

9.REAL TIME TX

3To change the default setting, press or to select ON (or OFF) and press Set. Go to Step 6. ––OR–– For the next fax transmission

only, press or to select NEXT FAX ONLY.

REAL TIME TX:ON

SELECT { } & SET

4Press Set.