Brother FAX 2750 Alternating Displays, Function Selection Table, FAX NO. & Start Copy Press Copy

24 C H A P T E R T H R E E

Alternating Displays

When you see alternating displays, the LCD sometimes alternates between the currently selected option, and a help message giving brief instructions about how to proceed. The display you’ll probably see most often is shown below, showing you, when you place a document in the feeder, that you can dial a number and send a fax, or you can make a copy.

FAX: NO. & START

COPY: PRESS COPY

Function Selection Table

If you have a basic understanding of how to program your fax machine, you can perform most of the programming settings without the Owner’s Manual. To help you understand the function selections, options and settings that are found in your fax programs, use the Function Selection Table below.

1. INITIAL SETUP
Function	Description	Factory Set		More Info
1. TONE/PULSE	Selects dialing mode.	TONE		p. 27
2. DATE/TIME	Enter date and time for LCD	01/01 1999 00:00		pp. 27–28
	display and heading on
	transmissions.
3. STATION ID	Program name, fax number and	—		pp. 28–30
	telephone number to appear on
	each transmitted page.
4. BEEPER	Adjust volume level of beeper.	LOW		p. 31
5. SLEEP MODE	Conserves power	00 Min.		p. 32
6. DELAYED TIMER	Sets the time of day that	—	p. 32
	delayed faxes will be sent.
2. SETUP RECEIVE
Function	Description	Factory Set		More Info
1. RING DELAY	Number of rings before fax	RING DELAY: 04		p. 34
	machine answers in FAX or
	FAX/TEL mode.
2. F/T RING TIME	Sets the time for “double ring” in	20		pp. 34–35
	FAX/TEL mode.
3. EASY RECEIVE	Receive fax messages without	ON		p. 35
	pressing the Start key.