Brother FAX 3750, FAX 2750 Manual and Automatic Fax Redial, Dual Access, Real Time Transmission

S E T U P S E N D 49

Manual and Automatic Fax Redial

If you’re sending a fax manually and the line is busy, after you disconnect the call press Redial/Pause to retry the number.

If you’re sending a fax automatically and the line is busy, the fax machine will automatically redial up to three times at 5 minute intervals.

Dual Access

You can scan up to 50 documents into the fax memory, even while the fax machine is receiving or sending another fax (from memory). You can set temporary settings for each fax you’re scanning, except Timer and Polling.

If you try to scan in and store a 51st fax, the fax machine will send it immediately, without storing it in memory.

If you get a MEMORY FULL message while scanning the first page of a fax, press Stop to cancel scanning. If you get a MEMORY FULL message while scanning in a subsequent page, you'll have the option to press Start to transmit the pages scanned so far, or to press Stop to cancel the operation.

1Make sure the document feeder is empty.

2Place the document in the feeder.

3Enter the fax number.

4Press Start . The fax machine starts scanning the document and the screen displays the job number (#XX) of the fax, and how much memory is available. Then the fax machine starts dialing. You can immediately repeat Steps 1 through 4 for the next fax.

Your fax machine normally operates in Dual Access mode. However, you can override Dual Access by using Real Time Transmission.

Real Time Transmission

When memory is full, the fax machine cannot continue to scan documents into memory before sending. However, you can turn on REAL TIME TX. Then place the documents in the feeder and enter the fax number. As soon as the phone line is free, the fax machine starts dialing and sending the fax.

1Place the document in the feeder.

2Press Function , 3 , 9 .

The screen displays

9.REALTIME TX:OFF?