Brother FAX 2750, FAX 3750 Storing Speed Dial Numbers, Screen prompts you to enter a location

SPEED-DIAL? #

2 Use the dial pad to enter a two-digit location (00–99).

3 Press Set . The screen displays your entry, then prompts you to enter the number you’re storing.

#05:

ENTER & SET

4 Enter the number (up to 20 digits).

5 Press Set . The screen now prompts you to store a name with this number. NAME:

64 C H A P T E R S E V E N

See

Speed Dialing

p. 68

See

ALL DIAL

Report

p. 79

5Use the dial pad to enter the name (up to 15 characters). You can use the chart on page 29 to help you enter letters— OR—Go to Step 6 to store the number without a name.

6Press Set . The screen prompts you to select the type of number this is. Use or to select the type you want.

FAX A fax only number

TEL A telephone (voice) number

FAX/TEL Both a fax and telephone (voice) number

7Press Set .

8 Return to Step 2 to store another One-Touch number— OR—Press Stop to exit. When you dial an AUTO DIAL number, the screen displays the name you’ve stored, or, if you haven’t stored a name, the number you’ve stored.

If you need to store a longer pause than 3.5 seconds, press Redial/Pause two or more times.

Even if you lose electrical power, numbers stored in memory will not be lost.

Storing Speed Dial Numbers

You can store Speed Dial numbers, so you can dial by pressing only three keys. There are 100 Speed Dial locations. Even if you lose electrical power, numbers stored in memory will not be lost.

1 Press Function , 6 , 2 .

The screen prompts you to enter a location.