Brother FAX 2750, FAX 3750 manual Remote Retrieval, Using Remote Access Code

74 C H A P T E R N I N E

Remote Retrieval

See

Changing

Remote

Access Code

p. 73

You can call your fax machine from any fax machine using touch tone and use a Remote Access Code and other button presses to retrieve fax messages. Keep the included Remote Control Access Card in your wallet as an aid.

Using Remote Access Code

1Dial your fax number from a fax machine using touch tone.

2When your fax machine answers and beeps, immediately enter your Remote Access Code (1 5 9 ).

3The fax machine signals the kinds of messages received:

1 long beep—Fax message(s)

No long beeps—No messages

4The fax machine then prompts you with two short beeps to enter a command. If you wait longer than 30 seconds to enter a command, the fax machine hangs up. If you enter an invalid command, the fax machine beeps three times.

5Press 9 0 to reset the fax machine when you finish.

6Hang up.

If your fax machine is set to Manual mode, you can access your machine by waiting about 2 minutes, then entering the Remote Access Code within 30 seconds.