Brother FAX 3750, FAX 2750 manual Broadcasting

S E T U P S E N D 59

See Setting Up Groups for Broadcasting p. 65

Broadcasting

Broadcasting is automatically sending the same fax message to multiple fax numbers. Using the Help/Broadcast key, you can include up to 24 One Touch locations, up to 100 Speed Dial locations, and up to 50 manually dialed numbers (maximum of 174 locations if you did not use up any locations for Groups, access codes or credit card numbers). However, available memory will vary with the types of jobs in memory and the number of locations used for broadcasting. If you broadcast to more than the maximum locations available, you will not be able to set up transmissions using dual access and the timer.

The easiest way to broadcast is to press Group keys, you can include One Touch, Speed Dial, and manually dialed numbers in the same broadcast. You must press Help/Broadcast between each of these locations. Use the Telephone Index to help you choose the numbers easily.

After the broadcast is completed, a Broadcast Report will be printed automatically to let you know the results.

■To stop the broadcasting in progress, press Stop . The LCD display asks if you want to cancel all locations or the location that is being sent.

■Enter the long dialing sequence numbers as you normally would, but keep in mind that each key counts as one location, so the number of locations you can call become limited.

■If the line is busy or for some other reasons a connection could not be made while broadcasting, the fax machine will redial the number automatically.

■If the memory is full, press Stop to abort the job or press Start to send the portion that is in the memory (if more than one page has been scanned).

1Insert the document into the feeder.

2Enter a number using One Touch, Speed Dial, Group number, Tel-index or the dial pad.

Example: Group number

3Press Help/Broadcast . You will be prompted to press the next number.

4Enter the next number. Example: Speed Dial

5Press Help/Broadcast .