137
Accessory List
Model Name | Description |
|
PC301 | Printing Cartridge (1 set per box) | |
PC300RF | 1 | PC301 Printing Cartridge |
PC302RF | 2 | PC301 Printing Cartridge |
PC304RF | 4 | PC301 Printing Cartridge |
Original Document Catch Tray | ||
For optimum print quality and product performance within
published specifications, use only the correct Brother replacement
ribbon. The use of other ribbons may invalidate your warranty.
(For FAX-920 or MFC-925) ➔
(For FAX-930 or FAX-940 E-mail)
➔
Change Answer Mode
Press 9 8
then for TAD, press 1.
Fax/Telephone (F/T), press 2.
Fax, press 3.
Exit Remote Operation
Press 9 0.
Change Remote Access Code
1Press Menu, 8, 3.
2Enter a 
cannot be changed.
3Press Set.
4 Press Stop to exit. | 4 |
REMOTE CONTROL ACCESS CARD
Using Remote Access Code
1Dial your machine phone number from a touch tone phone.
2Enter your Remote Control Access Code (159
) after the beep.
3Your machine signals the kinds of messages received:
1 long beep — Fax message(s) No beeps — no messages
4After 2 short beeps, enter a command.
5Press 9 0 to reset your machine when you finish.
6 Hang up. | 1 |
Check Receiving Status
Press 9 7
then for Fax message, press 1. Voice message, press 2.
1 long beep — received messages
3 short beeps — no messages
Change Answer Mode
Press 9 8
then for Message Manager (TAD mode),
press 1.
Fax/Telephone (F/T), press 2.
Fax Only, press 3.
Exit Remote Operation
Press 9 0.
Retrieve Personal Mailbox Messages (For
1Dial your fax machine number.
2During first level OGM, enter 0 1 
.
3During second level OGM, enter Personal Mailbox number 
.
4Enter 4-digit password.
5Press 1 to replay message. Press 2 to skip message.
Press 9 to stop message playback. Press 3 to erase all messages.
6Hang up.
MESSAGE MANAGER
REMOTE CONTROL ACCESS CARD
Using Remote Access Code
1Dial your fax machine phone number from a touch tone phone.
2Enter your Remote Control Access Code (159
) after the beep.
3The fax machine signals the kinds of messages received:
1 long beep — Fax message(s)
2 long beeps — Voice message(s)
3 long beeps — Fax and Voice message(s) No beeps — no messages
4After 2 short beeps, enter a command.
5Press 9 0 to reset the machine when you finish.
6Hang up.
5 | 6 | 1 |
