Broadcasting, Next-Fax Reservation | Brother MFC-925, FAX-930

66	C H A P T E R S I X

See “Setting Number Groups for Broadcasting” chap. 7

6Press 1 if you want to select additional settings. The display returns to the Setup Send menu––OR––Press2if you are finished choosing settings and go to Step 7. The screen prompts you to enter the fax number.

MEMORY 100%

ENTER FAX NO.

7Enter the fax number, and press Start. The machine will wait until the time you have entered to send the fax.

Broadcasting

Using the numbers you have stored in Groups, One Touch and Super Tel- Index memory, you can “broadcast” faxes automatically to up to 48 different locations in a few simple steps.

1Insert the document in the feeder.

2Press Help/Memory. The screen displays how much memory is available.

3Enter the One Touch and Super Tel-Index numbers (one after the other) or Group Number you have stored.

4Press Start. The machine stores the document in memory, then transmits it to all the numbers you entered. If the line is busy, the machine will retry.

Press Stop during transmission to cancel the current fax broadcast.

Next-Fax Reservation

Even if your fax is receiving another fax, you can set your machine to send your fax next. This way, you don’t have to wait for it to finish sending or receiving the other fax. You can dial this fax call manually, or by using Redial or One Touch dialling. (When you use One Touch Dial, only the memory location––not the name of the person you’re calling–– is displayed.)

1Insert the documents in the feeder. If necessary, press Resolution to adjust resolution.

2Enter the fax number.

3Press Start.

4Press Set. The screen displays

NEXT-FAX RESERVD

5To cancel the reservation, remove the documents and press Stop.

Image 76

Brother MFC-925, FAX-930, FAX-940 E-mail Broadcasting, Next-Fax Reservation, Memory 100% Enter FAX no, NEXT-FAX Reservd

Contents

Page Available Models for Each country Pan European Approvals Information Only for FAX-920 Important Safety Warning Table of Contents To select or change your Answer Mode Iii Recording the Message Manager’s Outgoing Message 100 110 Page Introduction UsingThis ManualFinding Information About Fax Machines Symbols Used In This ManualFax Tones and Handshake ECM Error Correction Mode Redial/Pause Help/Memory FAX-930 and FAX-940 E-mail Control Panel Overview Digital TAD A P T E R O N E Installation Packing List Choosing a Location Assembly Attach the Document Support Attach the Paper Wire Extension and Paper Support Install the Printing Cartridge Remove the stopper from the printing cartridge Connect the Handset Load PaperAcceptable Paper Connect the Power Cord Connect the Telephone Line Multi-Line Connections PABXs If you are installing the machine to work with a PabxRinger Equivalence Number REN Using Extension Telephones Connections Connecting an External Telephone Answering Device TADOutgoing Message OGM of External TAD Sequence of External TAD Reception Connecting an External Telephone Changing the Ribbon Blue Gear White Gear Machine On-Screen Programming Function ModeUser-Friendly Programming Function Selection Table Alternating DisplaysFAX NO. & Start Copy Press Copy Mailpress Email Setup Send Cancel JOB Remote FAX OPT FAX-920 and MFC-925 Only Miscellaneous Initial Setup Setting the Dialling Mode Tone/PulseSetting the Date and Time Getting Started Setting the Station ID Enter YearxxEnter Monthxx Enter Dayxx Entering Text FAXTEL Name Setting the Beeper Volume Special characters and symbolsInserting spaces Making corrections Setting Pabx Setting the Clock ChangePabx and Transfer Pbxoff Select & SET Setting the Speaker Volume Setting the Ring Volume Memory Storage A P T E R F O U R Select Answer Mode Basic Receiving Operations To select or change your Answer Mode FAX only FAX/TEL Tadanswer Mach ManualFAX only FAX/TEL Manual Tadmsg MGR Setting the F/T Ring Time Setting the Ring DelayRing TIME30 SEC Only for FAX-930 and FAX-940 E-mail Fax Detect Printing a Reduced Incoming Document Reduction Reception into Memory MEM.RECEIVE Advanced Receiving Operations For F/T Fax/Tel Mode OnlyOperation from an External or Extension Telephone Changing Remote Codes To change Remote CodesRemote ACT.ON ACT.CODE*51 Caller ID Caller IDentification Set the Caller ID to onAdvantages of Caller ID Display ID Select & SET Caller ID Appears on the Display When Your Telephone Rings How Does the Caller ID Work?Caller ID is Stored inYour Machine’s Memory Helpful Hints Press Start KEY Selecting a Caller ID from the Memory for Call ReplyDialling Telephone To Activate Certain Network Services When Using Call Reply Call Reply to DDI numbers via Caller ID Setup for Polling Receive PollingPrinting Caller ID List Secure Polling Pollingstandard Select & SET Setup for Polling Receive with Secure CodeEnter FAX no Then Press Start Sequential Polling Setup Delayed Polling ReceivePollingstandard Cancel JOB Cancelling a Scheduled JobDialling Multiple Copies For FAX-920/930/MFC-925 Only Copy FunctionsPC Interface Reducing and Enlarging Copies For FAX-920/930/ MFC-925 Only Multiple copies For FAX-940 E-mail Only See Resolution in this Chapter Before You Begin Automatic Transmission Manual TransmissionManual and Automatic Fax Redial Basic Sending Operations Composing an Electronic CoverCover Page for Next Fax Only Please Call Urgent Confidential Accepted Next Always Send CoverCoverpageoff Coverpageon Using a Printed Cover Contrast Cover Page MessageComposing Your Own Comments Resolution Overseas ModeOverseas Mode Advanced Sending Operations Memory Transmission Call ReservationCall Reserveoff Call Reserveon Call Messageoff Call Messageon Delayed Transmission Timer Print Sample Call Back Message Broadcasting Next-Fax ReservationMemory 100% Enter FAX no NEXT-FAX Reservd Multiple Resolution Transmission Setup for Polling Transmit Setup for Polling Transmit with Secure Code Interrupting Timer and Polling Transmit Jobs Insert Document Multiple Transmission Multi TX Storing Numbers for Easy Dialling Storing One Touch Dial Numbers Super Tel-Index Assigning Each of the Four Super Tel-Index Keys a Name Storing Numbers to Each KeySelect Quickdial Enter & SET Amother Changing Stored Numbers as Super Tel-IndexNamemike Enter & SET How to use Quick-Dial Keys as Super Tel-Index Keys Searching for a Name on the LCD Setting Number Groups for Broadcasting Changing One Touch Super Tel-Index NumbersSpeed-Dialling Change 2.QUIT Setup GROUPG0 Enter & SET Name Enter & SET A P T E R S E V E N Making Voice Calls Manual Dialling One Touch Dialling Super Tel-Index Dialling Mute PauseTone/Pulse On Hook Dialling Tel Key Only for FAX-920 and MFC-925 Remote Fax Options Fax ForwardingProgramming a Fax Forwarding Number FAX Fwdon Setting Fax Storage Changing the Remote Access CodeFAX Storageoff Select & SET Erase ALL DOC? UsingYour Remote Access Code Remote CommandsChange Fax Forwarding Setting Remote Retrieval Change Answer Mode Retrieve a FaxCheck the Receiving Status Exit Remote Operation Retrieving the Memory Status List Retrieving Fax Messages Changing the Fax Forwarding Number Flexible Memory Settings Message Store Message Manager ModeManager Setting Up Message Manager Setting the Message StoreDocoff Select & SET Voiceon Select & SET TAD Message Select & SET Listening the Outgoing Message OGMTAD Message Activating Message Manager Mode Message IndicatorWhat Happens When the Memory Is Full Erasing the Outgoing Message OGM Printing a Fax Message Playing Voice Messages and MemosPrint DOC? Backup Printing Option Backup Printon Select & SETErasing Messages To erase voice messages individually Setting the Maximum Time for Incoming Messages Setting the Toll SaverTo erase messages all at once Erase ALL VOICE? Select & SET ICM Recording Monitor Recording a MemoRecording a Conversation Fax Forwarding/Paging Programming a Fax Forwarding Number Recording the Paging Outgoing Message OGMFAX Forward Paging MSG Using the Remote Access Code Programming the Paging NumberPaging PAG# Enter & SET Changing the Remote Access Code Remote Control Commands Remote control commands Detail Operation Retrieving the Memory Status List Changing the Fax Forwarding Number Message Manager Plus Manager PlusStart with a Plan Setting Up Message Manager Plus VoiceRecording Voice Information in Memory Box Voice no Playing Voice Information in Memory Box Personal MailboxErasing Voice Information in Memory Box Recording Personal Mailbox OGM/Password Passwordxxxx To erase an individual message To erase all messages Recording the Second Level OGM Recording a Memo in a Personal Mailbox Recording First Level OGM Playing the Second Level OGMErasing the Second Level OGM MSG MGR Plus Playing the First Level OGM Turning On Message Manager PlusErasing the First Level OGM FAX/MFC Settings and Journal Xmit Report Journal QUICK-DIAL System Setup Memory StatusPrinting Reports To Print a Report Journal Period Transmission Verification Xmit ReportJournal Period Important Safety Instructions H a P T E R T H I R T E E N Babt Approval For FAX-930/940 E-mail/MFC-925 Only H a P T E R T H I R T E E N Maintenance TroubleshootingError Messages Check Paper H a P T E R F O U R T E E N Clean UP Scanner COMM.ERRORConnection Fail Disconnected Machine Error Press Stop KEY Printer FaultScanner Error No RESPONSE/BUSY Printing or Receiving Faxes IfYou Are Having Difficulty withYour MachinePhone Line or Connections Sending Faxes Handling Incoming Calls Transmission Verification Report Prints Resulterror Packing and Shipping the Machine H a P T E R F O U R T E E N Close the carton Cleaning the Scanner Regular MaintenanceCleaning the Print Head Type Automatic redial Glossary L O S S a R Y O S S a R Y L O S S a R Y Index Personal Mailbox Remote Retrieval Remote Commands Standard Resolution N D E Accessory List Model Name Description Remote Commands Declaration of Conformity UK/S.AF/IRE