Brother FAX-930, MFC-925, FAX-940 E-mail, FAX-920 manual Setup Send

O N - S C R E E N P R O G R A M M I N G 27

2. SETUP RECEIVE
Function		Description	Factory Set		Chapter
1.	RING DELAY	Number of rings before the	RING DELAY:02		5
		machine answers in F/T, FAX	TOLL SAVER:OFF
		or TAD (Message Manager)	(FAX-930 and FAX-
		mode.	940 E-mail Only)
2.	F/T RING TIME	Sets the time for “F/T pseudo-	30		5
		ring” in F/T mode.
3.	FAX DETECT	Receive fax messages without	ON		5
		pressing the Start key.
4.	REMOTE CODE	Enter code to activate or	OFF		5
		deactivate machine from a	(	51, #51)
		remote location.
5.	REDUCTION	Reduces size of image.	AUTO		5
6.	MEM.RECEIVE	Automatically stores any	ON		5
		incoming faxes in its memory
		if it runs out of paper.
7.	POLLING RX	You call another fax machine to	--		5
		receive a fax from it.
8.	PC INTERFACE	Fax Receive Only/PC Priority/	PC PRIORITY		See Quick
(With MFL Pro for Fax)		PC Receive Only			Start Guide
					for MFL
					Pro for Fax
3. SETUP SEND
Function		Description	Factory Set		Chapter
1.	COVERPG SETUP	Automatically sends a cover	OFF		6
		page you program or prints a
		sample coverpage.
2.	COVERPAGE NOTE	Program customized message	--		6
		for fax cover page.
3.	CONTRAST	Change lightness or darkness of	AUTO		6
		a fax you are sending.
4.	RESOLUTION	Allows you to change	STANDARD		6
		resolutions page by page.
5.	OVERSEAS MODE	Adjusts for sometimes difficult	OFF		6
		overseas transmissions.
6.	CALL RESERVE	You can send a fax, then speak	OFF		6
		or print a sample call back
		message.
7.	TIMER	Send documents later.	--		6
8.	POLLED TX	Set Polled Transmission for	--		6
		someone to poll your fax
		machine to receive a fax.