Brother FAX-930 manual Copy Functions, Multiple Copies For FAX-920/930/MFC-925 Only, PC Interface

S E T U P R E C E I V E 55

Setting PC Interface Mode

(Only for MFC-925 or with Multi-Function Link Pro for Fax option)

If you connect your machine to your PC, you can receive faxes into your PC. See the Quick Start Guide to set up for Multi-Function Link for Fax. After completing the setup for Multi-Function Link Pro for Fax, you can select PC INTERFACE Mode (PC PRIORITY/PC RECEIVE ONLY/ FAX RECEIVE ONLY) for routing incoming faxes.

1Press Menu, 2, 8. The screen displays:

8.PC INTERFACE

2Press Z or X to select PC PRIORITY, PC RECEIVE ONLY or

FAX RECEIVE ONLY.

3Press Set when the screen displays your selection.

4Press Stop to exit.

This function is not available for FAX-940 E-mail.

Copy Functions

Your machine cannot scan anything closer than 4 mm from the edge of the paper. Set the resolution to S.FINE or PHOTO.

1Place document face down in the feeder.

2Press Copy.

3Press Copy. (If you press Set or just wait for 5 seconds before pressing Copy, the screen prompts you to select a reduction or

enlargement ratio. See “Reducing and Enlarging Copies”.)

Do NOT pull on the paper while copying is in progress. To cancel, press

Stop.

Multiple Copies (For FAX-920/930/MFC-925 Only)

You can make multiple copies using your machine, and you can choose whether the copies will be STACKED (all copies of page 1, then all copies of page 2, etc.) or SORTED (collated).

1Place the document face down in the feeder.

2If you want copies “stacked,” press Copy. ––OR––

If you want copies “sorted” (collated), press Sort.