20 | C H A P T E R T W O |
|
3End your message by giving your Remote Activation Code for people sending manual faxes. For example:
“After the beep, leave a message or send a fax manually by pressing
51.”
Please note that some faxes that are sent manually cannot be received automatically because some fax machines do not send a fax tone in manual mode. In these cases you must inform callers that they must enter the remote activation code to send a fax.
Sequence of External TAD Reception
When you leave your machine set in TAD mode, all calls will be answered by the externally connected telephone answering device, and fax calls will be received automatically provided they come from a machine which sends standard CalliNG tone (CNG).
Incoming Call
The call is picked up by the TAD. (Recommended short TAD ring delay such as 1 or 2 rings.)
Fax reception is automatically activated by fax tone.
The fax message is received on paper.
|
|
| The external TAD | |
|
|
| ||
Auto dial | outgoing message | |||
fax call | begins (recommended | |||
|
|
| length of 10 seconds | |
|
|
| or less). | |
|
|
|
|
|
|
|
|
| |
|
|
| Voice call |
|
|
|
|
|
|
|
|
| The caller leaves a | |
|
|
| voice message on the | |
|
|
| external TAD. | |
|
|
|
|
|
|
|
| The caller must press | |
Manual | Start or enter your | |||
remote activation | ||||
fax call | ||||
code to activate the | ||||
|
|
| ||
|
|
| machine and press | |
|
|
| Start. | |
The fax message is received on paper.
The caller can also send a fax message after the voice message.
