Regular dialling, Redialling, Press Start | Canon FAX-L400 specification

❚Regular dialling:

Use the numeric keys to enter the fax number → press OK.

Ex:

TEL= 9057951111

	• If you make a mistake, press 4 (–), or press Function → Delete to delete the last number. Or press
NOTE	Function → Clear to delete all numbers you entered.

•You must enter the second fax number within five seconds of entering the first one. After that, all subsequent fax numbers must be entered within 10 seconds of each other. If you wait longer than this,

the machine automatically begins scanning the document for sending. If you prefer the machine not to do this, disable the TIME OUT setting. (→ p. 10-6)

•If you want to review the numbers you just entered, use 4 (–)or e (+) to scroll through the numbers.

❚Redialling:

Press Redial/Pause to dial the last number you dialled with numeric keys.

4Press Start.

•After the scanning is finished, the machine starts to dial the number.

•The machine first sends the document to the one-touch speed dialling destinations, then the coded speed dialling destinations, and finally to the destinations dialled using regular dialling.

•To cancel sending, press Stop/Reset → 4 (–). Sending to all destinations specified in step 3 is cancelled.

You can not cancel just one destination.

After cancelling, the machine prints a MULTI TX/RX REPORT. (→ p. 8-4)

	• If a number is busy, the machine continues sending to the other destinations and then redials the
NOTE	number that was busy.

•If the machine’s memory becomes full while scanning your document, MEMORY FULL appears in the LCD and the document being scanned stops in the ADF. Press OK to make the document come out automatically. If this happens, divide the documents into several sections and send each section separately.

4-14

Image 47

Canon FAX-L400 manual Regular dialling, Redialling, Press Start

Contents

FacsimileFacsimile GuideGuide Set-up Guide Quick Reference Guide User’s Guide Using Your DocumentationCopyright Trademarks H12257 FAX-L400 Model Name Contents Receiving Faxes Appendix Specifications → User’s Guide Type Conventions Used in This Guide One-touch Panel Closed Hook Key IntroductionCustomer Support Operation Panel Stop/Reset Key Fax Resolution KeyUse/Memory indicator Alarm indicator Memory Reference Key Receive Mode KeyDelayed Transmission Key One-touch Panel Opened Standby Display Methods of Registering Information in the Machine Guidelines for Entering Letters, Symbols, and NumbersRegistering Information Entering Letters Continue entering other letters using the numeric keysEntering Symbols Correcting a Mistake Press T to switch to number mode Press the numeric keyContinue entering other numbers using the numeric keys Registering Sender Information What is Sender Information? Press Additional Functions Use 4 -or e + to select 7.TIMER SettingsPress Stop/Reset to return to standby display Entering the Date and Time Registering Your Fax/Telephone Number and Name Use 4 -or e + to select 4.FAX Settings → press OK four times Use 4 -or e + to select 8.PRINT Lists → press OK twice Use 4 -or e + to select 2.TEL Line Type → press OK Setting the Telephone Line Type Use 4 -or e + to select PBX → press OK Dialling Through a SwitchboardUse 4 -or e + to select 4.FAX Settings → press OK twice Use 4 -or e + to select 6.R-KEY Setting → press OK Press Redial/Pause to enter a pause → press OK If you selected Hooking in stepPress OK If you selected Prefix in step Speed Dialling Methods What is Speed Dialling?Speed Dialling Registering Numbers for One-touch Speed Dialling One-touch Speed Dialling To change a one-touch speed dialling entry Changing/Deleting a One-touch Speed Dialling Entry Use 4 -or e + to select 2.CODED SPD Dial → press OK Coded Speed DiallingRegistering Numbers for Coded Speed Dialling Use 4 -or e + to select 5.ADD. Registration → press OK Changing/Deleting a Coded Speed Dialling Entry Press OK Press Stop/Reset to return to standby display To change a coded speed dialling entry To register a group under a one-touch speed dialling key Group DiallingCreating Groups Use 4 -or e + to select 3.GROUP Dial → press OK To enter a destination registered for coded speed dialling Use 4 -or e + to select 2.SPEED Dial List → press OK Speed Dialling ListsPrinting Speed Dialling Lists Use 4 -or e + to select 8.PRINT Lists → press OK Coded Dial List One-touch List Group Dial List Cancelling the Printout ListUse 4 -or e + to select 3.CANCEL Report → press OK Press 4 -for YESPage Preparing to Send a Fax Adjusting the Quality of Your FaxesSetting the Scanning Resolution Sending Faxes Press FAX → Fax Resolution to select the resolution Dialling Methods Setting the Scanning DensityWhen the Fax Number is Not Registered in the Machine When the Fax Number is Registered in the Machine Regular Dialling One-touch Speed Dialling Group Dialling Coded Speed Dialling Press 4 -or e + to display the other names Directory DiallingPress Directory Memory Sending Press FAX to set to Fax modeUsing the ADF Sending Methods Press 4 -or e + to select the document size Using the Platen GlassPress Start to begin scanning for sending Press Function → Book Sending Press Start to begin scanning Press Stop/Reset Cancelling SendingCancelling Memory Sending Press Stop/Reset → OK Manual Redialling Redialling When the Line is BusyCancelling Manual Redialling Cancelling Automatic Redialling Coded speed dialling Sequential BroadcastingSending a Document to More Than One Destination One-touch speed dialling Press Start Regular diallingRedialling Press Function → Delayed Transmission Delayed Sending Press System Monitor Confirming Transmission Status and Sending ReservationConfirming Transmission Status Press 4 -or e +, to select 2.TX/RX Result → press OK Confirming Sending Result and Reservation Press Function Press Memory Reference → OK Documents Stored in MemoryPrinting a List of Documents in Memory Enter the fax number Resending a Document in MemoryPress Function → Memory Reference Use 4 -or e + to select 3.RESEND Document → press OK Use 4 -or e + to select 3.PRINT Document → press OK Printing a Document in Memory Press 4 -to delete the document Deleting a Document from MemoryUse 4 -or e + to select 4.DELETE Document → press OK Page Different Ways to Receive a Fax Receiving Faxes Press Receive Mode until the mode you want appears Setting the Receive Mode What Happens When FaxTel Mode is Selected Setting the Options for FaxTel Mode Use 4 -or e + to select Receive or Disconnect → press OK Use 4 -or e + to select 4.FAX Settings → press OKUse 4 -or e + to select 4.RX Settings → press OK Use 4 -or e + to select 2.FAX/TEL OPT.SET → press OK twice If you hear a slow beep tone or silence Receiving Faxes ManuallyIf you hear a person’s voice Receiving Faxes While Performing Other Tasks Receiving Faxes in Memory When a Problem OccursCancelling Receiving Press 4 -to cancel receiving Before You Use Polling Receiving Using PollingWhat Is Polling? Dial the other party’s number Polling Other Fax Machines to Receive a DocumentUse 4 -or e + to select 2.POLLING RX → press OK Before You Can Be Polled to Send Setting Up Polling SendingSetting Up a Polling Box Use 4 -or e + to select 3.ERASE After TX → press OK Use 4 -or e + to select 2.PASSWORD → press OKPress Stop/Reset to return to the Standby display Press Function → Polling Scanning a Document into the Memory for Polling SendingPlace your documents on the machine Use 4 -or e + to select 2.CHANGE Data → press OK Changing the Polling Box Settings Use 4 -or e + to select 3.DELETE File → press OK Deleting a Polling BoxPage Dialling an Overseas Number With Pauses Special FeaturesUse the numeric keys to dial the international access code Special Dialling Pause at the end of a number P is fixed to 10 seconds Switching Temporarily to Tone Dialling Continue with the operation you are performing Dialling Through a SwitchboardConfirming a Dial Tone Press Function → D.T. for dial tone detection Use 4 -or e + to select 2.LOCK Phone → press OK Use 4 -or e + to select 7.SYSTEM Settings → press OKRestricting Use of Your Machine Enabling Restriction of Your Machine Cancelling Restriction of Your Machine Summary of Reports and Lists Reports and Lists Use 4 -or e + to select 1.ACTIVITY Report → press OK Press Function → Report Slerexe Company Limited TX Transmission Report Multi TX/RX Transaction Report RX Reception Report LCD Messages Troubleshooting You can not send a fax Faxing ProblemsSending Problems Faxes sent from the machine are spotted or dirty Can not send using Error Correction Mode ECMErrors occur frequently while sending Can not receive a document manually Receiving ProblemsCan not receive a fax automatically Faxes do not print Can not receive a fax using Error Correction Mode ECMErrors occur frequently while receiving Print quality is poor Telephone disconnects while you are talking Telephone ProblemsIf a Power Cut Occurs You can not dial If You Can not Solve the Problem Page Use 4 -or e + to select the submenu you want to change Setting the Additional FunctionsAccessing the Additional Functions Understanding the Additional Functions 10-2 Menu Descriptions 10-3 10-4 FAX Settings 10-5 10-6 10-7 Delete File 10-8 10-9 Selects the country where you are using your machine 10-10 ADD. Registration 10-11 Print Lists 10-12 Telephone SpecificationsFacsimile Page Index Document Memory List Memory Clear Report Redial Standard Memo Memo Memo 33126U.S.A