Manuals / Canon / Computer Equipment / Fax Machine

Canon FAX-L400 manual Telephone Problems, If a Power Cut Occurs, You can not dial

Models: FAX-L400

1 110

Download 110 pages 62 Kb

Page 85

Telephone Problems

❚You can not dial.

The telephone line may not be connected properly.

• Make sure all line connections are secure. (→ Set-up Guide)

The machine may not be set for the type of telephone line in use (pulse/tone).

• Make sure the machine is set for the correct telephone line type. (→ p. 2-8)

The LOCK PHONE function may be set to ON.

• Make sure the LOCK PHONE function is set to OFF. (→ p. 10-9)

❚The telephone disconnects while you are talking.

The telephone line may not be plugged in securely.

•Check that the modular cords are connected securely to the jacks on the machine, the telephone jack on your wall and the connecting jack on your telephone. (→ Set-up Guide)

If a Power Cut Occurs

If power is suddenly lost due to an outage or accidental unplugging, a built-in battery retains the user data settings and the speed dialling settings. Any sent or received documents stored in memory are backed up for about one hour.

During a power cut, functions are limited as follows:

•You can not send, receive, or copy documents.

•You can not make telephone calls using the optional handset. You may not be able to make telephone calls even with a telephone connected to the machine, depending on the type of telephone you use.

•You can receive telephone calls using the optional handset or telephone connected to your machine.

When power is restored to the machine, the machine will automatically print a list of documents that were stored in memory at the time of the power cut.

03/12 2002 15:38 FAX 123 4567

CANON

001

************************************

*** MEMORY CLEAR REPORT ***

************************************

MEMORY FILES DELETED

TX/RX NO	MODE		DESTINATION TEL/ID	PGS.	SET TIME	ST. TIME

0023	SEQ. B,CAST	[	01] Canon CANADA	3	03/12 14:23
		[	05] Canon OPTICS
0024	TRANSMIT	[A 32] Canon UK		1	03/12 14:28

• Make sure that A4-size paper is loaded in the cassette. If a different paper size is loaded, the report can

NOTE not be printed.

•If there is no paper in the cassette or no toner in the cartridge when power is restored, the MEMORY CLEAR REPORT will not be printed.

9-6

Image 85

Canon FAX-L400 Telephone Problems, If a Power Cut Occurs, You can not dial, Telephone disconnects while you are talking

Contents

FacsimileFacsimile GuideGuide Copyright Using Your DocumentationTrademarks Set-up Guide Quick Reference Guide User’s GuideH12257 FAX-L400 Model NameContents Receiving Faxes Appendix Specifications → User’s Guide Type Conventions Used in This GuideCustomer Support IntroductionOperation Panel One-touch Panel Closed Hook KeyUse/Memory indicator Fax Resolution KeyAlarm indicator Stop/Reset KeyDelayed Transmission Key Receive Mode KeyOne-touch Panel Opened Memory Reference KeyStandby Display Registering Information Guidelines for Entering Letters, Symbols, and NumbersMethods of Registering Information in the Machine Entering Symbols Continue entering other letters using the numeric keysEntering Letters Continue entering other numbers using the numeric keys Press T to switch to number mode Press the numeric keyCorrecting a Mistake Registering Sender Information What is Sender Information?Press Stop/Reset to return to standby display Use 4 -or e + to select 7.TIMER SettingsEntering the Date and Time Press Additional FunctionsRegistering Your Fax/Telephone Number and Name Use 4 -or e + to select 4.FAX Settings → press OK four timesUse 4 -or e + to select 8.PRINT Lists → press OK twice Use 4 -or e + to select 2.TEL Line Type → press OK Setting the Telephone Line TypeUse 4 -or e + to select 4.FAX Settings → press OK twice Dialling Through a SwitchboardUse 4 -or e + to select 6.R-KEY Setting → press OK Use 4 -or e + to select PBX → press OKPress OK If you selected Hooking in stepIf you selected Prefix in step Press Redial/Pause to enter a pause → press OKSpeed Dialling What is Speed Dialling?Speed Dialling Methods Registering Numbers for One-touch Speed Dialling One-touch Speed DiallingTo change a one-touch speed dialling entry Changing/Deleting a One-touch Speed Dialling EntryRegistering Numbers for Coded Speed Dialling Coded Speed DiallingUse 4 -or e + to select 5.ADD. Registration → press OK Use 4 -or e + to select 2.CODED SPD Dial → press OKChanging/Deleting a Coded Speed Dialling Entry Press OK Press Stop/Reset to return to standby displayTo change a coded speed dialling entry Creating Groups Group DiallingUse 4 -or e + to select 3.GROUP Dial → press OK To register a group under a one-touch speed dialling keyTo enter a destination registered for coded speed dialling Printing Speed Dialling Lists Speed Dialling ListsUse 4 -or e + to select 8.PRINT Lists → press OK Use 4 -or e + to select 2.SPEED Dial List → press OKCoded Dial List One-touch ListUse 4 -or e + to select 3.CANCEL Report → press OK Cancelling the Printout ListPress 4 -for YES Group Dial ListPage Setting the Scanning Resolution Adjusting the Quality of Your FaxesSending Faxes Preparing to Send a FaxPress FAX → Fax Resolution to select the resolution When the Fax Number is Not Registered in the Machine Setting the Scanning DensityWhen the Fax Number is Registered in the Machine Dialling MethodsRegular Dialling One-touch Speed Dialling Group Dialling Coded Speed DiallingPress Directory Directory DiallingPress 4 -or e + to display the other names Using the ADF Press FAX to set to Fax modeSending Methods Memory SendingPress Start to begin scanning for sending Using the Platen GlassPress Function → Book Sending Press 4 -or e + to select the document sizePress Start to begin scanning Cancelling Memory Sending Cancelling SendingPress Stop/Reset → OK Press Stop/ResetCancelling Manual Redialling Redialling When the Line is BusyCancelling Automatic Redialling Manual RediallingSending a Document to More Than One Destination Sequential BroadcastingOne-touch speed dialling Coded speed diallingRedialling Regular diallingPress Start Press Function → Delayed Transmission Delayed SendingConfirming Transmission Status Confirming Transmission Status and Sending ReservationPress System Monitor Press 4 -or e +, to select 2.TX/RX Result → press OK Confirming Sending Result and ReservationPrinting a List of Documents in Memory Documents Stored in MemoryPress Function Press Memory Reference → OK Press Function → Memory Reference Resending a Document in MemoryUse 4 -or e + to select 3.RESEND Document → press OK Enter the fax numberUse 4 -or e + to select 3.PRINT Document → press OK Printing a Document in MemoryUse 4 -or e + to select 4.DELETE Document → press OK Deleting a Document from MemoryPress 4 -to delete the document Page Different Ways to Receive a Fax Receiving FaxesPress Receive Mode until the mode you want appears Setting the Receive ModeWhat Happens When FaxTel Mode is Selected Setting the Options for FaxTel ModeUse 4 -or e + to select 4.RX Settings → press OK Use 4 -or e + to select 4.FAX Settings → press OKUse 4 -or e + to select 2.FAX/TEL OPT.SET → press OK twice Use 4 -or e + to select Receive or Disconnect → press OKIf you hear a person’s voice Receiving Faxes ManuallyIf you hear a slow beep tone or silence Cancelling Receiving Receiving Faxes in Memory When a Problem OccursPress 4 -to cancel receiving Receiving Faxes While Performing Other TasksWhat Is Polling? Using PollingBefore You Use Polling Receiving Use 4 -or e + to select 2.POLLING RX → press OK Polling Other Fax Machines to Receive a DocumentDial the other party’s number Setting Up a Polling Box Setting Up Polling SendingBefore You Can Be Polled to Send Press Stop/Reset to return to the Standby display Use 4 -or e + to select 2.PASSWORD → press OKUse 4 -or e + to select 3.ERASE After TX → press OK Place your documents on the machine Scanning a Document into the Memory for Polling SendingPress Function → Polling Use 4 -or e + to select 2.CHANGE Data → press OK Changing the Polling Box SettingsUse 4 -or e + to select 3.DELETE File → press OK Deleting a Polling BoxPage Use the numeric keys to dial the international access code Special FeaturesSpecial Dialling Dialling an Overseas Number With PausesPause at the end of a number P is fixed to 10 seconds Switching Temporarily to Tone Dialling Confirming a Dial Tone Dialling Through a SwitchboardPress Function → D.T. for dial tone detection Continue with the operation you are performingRestricting Use of Your Machine Use 4 -or e + to select 7.SYSTEM Settings → press OKEnabling Restriction of Your Machine Use 4 -or e + to select 2.LOCK Phone → press OKCancelling Restriction of Your Machine Summary of Reports and Lists Reports and ListsUse 4 -or e + to select 1.ACTIVITY Report → press OK Press Function → ReportSlerexe Company Limited TX Transmission ReportMulti TX/RX Transaction Report RX Reception ReportLCD Messages TroubleshootingSending Problems Faxing ProblemsYou can not send a fax Errors occur frequently while sending Can not send using Error Correction Mode ECMFaxes sent from the machine are spotted or dirty Can not receive a fax automatically Receiving ProblemsCan not receive a document manually Errors occur frequently while receiving Can not receive a fax using Error Correction Mode ECMPrint quality is poor Faxes do not printIf a Power Cut Occurs Telephone ProblemsYou can not dial Telephone disconnects while you are talkingIf You Can not Solve the Problem Page Accessing the Additional Functions Setting the Additional FunctionsUnderstanding the Additional Functions Use 4 -or e + to select the submenu you want to change10-2 Menu Descriptions10-3 10-4 FAX Settings10-5 10-6 10-7 Delete File 10-810-9 Selects the country where you are using your machine10-10 ADD. Registration10-11 Print Lists10-12 Facsimile SpecificationsTelephone Page Index Document Memory List Memory Clear Report Redial Standard Memo Memo Memo CANON703WaterfordLATINWayAMERICA,Suite400Miami,FloridaINC 6390CANONDixieCANADARoad INC. OntarioL5T1P7,Canada