Appendix B Declarations of Conformity and Regulatory Information
Industry Canada
Caution To meet regulatory restrictions, the access point must be professionally installed.
Industry Canada
Models: | IC Certification Number: |
Canadian Compliance Statement
This Class A Digital apparatus meets all the requirements of the Canadian
Cet appareil numerique de la classe A respecte les exigences du Reglement sur le material broilleur du Canada.
This device complies with Class A Limits of Industry Canada. Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may cause undesired operation.
Cisco Aironet Access Points are certified to the requirements of
This device has been designed to operate with antennas having a maximum gain of 13 dBi for 2.4 GHz and 14 dBi for 5 GHz. Antennas having a gain greater are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that permitted for successful communication.
Declaration of Conformity for RF Exposure
This access point product has been found to be compliant to the requirements set forth in CFR 47 Section 1.1307 addressing RF Exposure from radio frequency devices as defined in Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. Antennas with less than 8 dBi gain should be located at a minimum of 7.9 in (20 cm) or more from the body of all persons and 20 inches (50 cm) for antennas up to 13 dBi gain.
This access point is also compliant to EN 50835 for RF exposure.
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
| ||
|
