Cisco Systems 1550, AIRCAP1552HAK9 manual Antenna N-Type Connector Locations

Contents

Installing 1552C or 1552CU in the Mounting Bracket 2-26
Cable Strand Mounting the 1552C or 1552CU Access Point	2-26
Mounting the 1552C or 1552CU Access Point on a Pole/Wall	2-30
Mounting the 1552C or 1552CU Access Point Facing Up in a Vault Application 2-33

		Installing Antennas	2-36
		Antenna N-Type Connector Locations 2-37
		Antenna Mounting Options				2-38
		Safety Precautions		2-41
		Grounding the Access Point			2-41
		Connecting a Fiber-Optic Cable to the Access Point 2-42
		Powering the Access Point			2-45
		Connecting a 1500 Series Power Injector 2-45
		Connecting an Ethernet Cable to the Access Point						2-46
		AC Power Cords for Cisco Aironet 1550 Series Outdoor Mesh Access Points 2-49
		Connecting Streetlight AC Power					2-51
		Connecting an AC Power Cable to the Access Point						2-54
		Connecting a DC Power Cable to the Access Point						2-55
		Connecting a Cable POC Power to the Access Point						2-58
		Configuring the Access Point 2-60
		Adding the Access Point MAC Addresses to the Controller Filter List 2-60
		Configuring a RAP		2-61
		Configuring a Bridge Group Name					2-61
		What to Do Next	2-63
		Troubleshooting 3-1
C H A P T E R 3
		Guidelines for Using the Access Points					3-2
		Important Notes	3-2
		Convergence Delays			3-2
		Bridge Loop	3-3
		Controller DHCP Server			3-3
		MAP Data Traffic		3-3
		Controller MAC Filter List			3-3
		Using DHCP Option 43		3-4
		Monitoring the Access Point LEDs				3-4
		Verifying Controller Association				3-5
		Changing the Bridge Group Name				3-6
		Connecting to the Access Point Locally					3-6
		Access Point Power Injector			3-8
			Cisco Aironet 1550 Series Outdoor Mesh Acces Point Hardware Installation Guide
	OL-24247-01								v