Cisco Systems 1550, AIRCAP1552HAK9 manual Cable Strand Installation Hardware and Tools

Chapter 2 Installing the Access Point

Warnings

–One mounting bracket

–Twelve hex bolts (M8 x16)

–One M8 flange nut

–Six M8 flat washers

–Ten M8 split lock washers

–Two stainless steel mounting straps

•Customer banding strap tool (BAND IT)—(AIR-BAND-INST-TL=)

•Customer-supplied 13-mm and box-end wrench or socket set

•Customer-supplied adjustable wrench, 22 mm socket, or Sealcon S-2200-WR socket wrench

Cable Strand Installation Hardware and Tools

To install the access point on a cable strand, you need the following additional parts:

•Cable strand mount kit (AIR-ACCSMK1550=)

–Four hex bolts (M8, 0x16mmL)

–Four M8 split lock washers (0.14 8mmoD, 2mmT)

–Four M8 flat washers (16.0mmOD, 1.6mmT)

–Two carriage bolt fasteners (5/16-18 x 1.25 in.)

–Six hex nuts, serrated flange (5/16-18)

–Four carriage bolts (5/16 x 5/8LG)

–Strand mounting brackets—1 left bracket, 1 right bracket, 2 adjustable brackets

–Four strap clamps

•Customer-supplied 13-mm box-end wrench or socket set

•Customer-supplied adjustable wrench, 22 mm socket, or Sealcon S-2200-WR socket wrench

Warnings

Translated versions of all safety warnings are available in the safety warning document that shipped with your access point or on Cisco.com. To browse to the document on Cisco.com, refer to Appendix A, “Translated Safety Warnings” for instructions.

Warning IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide

2-4 OL-24247-01