Cisco Systems AIRCAP1552HAK9, 1550 manual GPS Option, Metal Enclosure, Optional Hardware

Chapter 1 Overview

Hardware Features

GPS Option

A GPS module is required to accurately track the location of the AP and report it to the controller. to provide location information for Cisco's AIR-CAP 1552I/C/CU/E/EU/H product line.

For information on routing and securing the cable for the GPS antenna, refer to the 1550 Series GPS Hardware Mounting Guide.

Metal Enclosure

The access point uses a metal enclosure that can accommodate both indoor or outdoor operating environments and an industrial temperature operating range of –40 to 131°F (–40 to 55°C). The access point complies with NEMA 4 and IP67 requirements.

Optional Hardware

Depending on what you ordered, the following optional access point hardware may be part of your shipment:

•External antennas, depending on which ones you purchased

•Strand mount kit (AIR-ACCSMK1550=)

•Pole mount kit (AIR-ACCPMK1550=)

•Band installation tool for pole mount kit (AIR-BAND-INS-TL=)

•AC power cord, 40 ft. (12.2 m) with North American plug (AIR-CORD-R3P-40NA=)

•AC power cord, 40 ft. (12.2 m) with European unterminated end (AIR-CORD-R3P-40UE=)

•Street light power tap (AIR-PWR-ST-LT-R3P=)

•Power injector (AIR-PWRINJ1500-2=)

•1000BASELX single-mode Rugged SFP (GLC-LX-SM-RGD=)

•1000BASESX multimode Rugged SFP (GLC-SX-MM-RGD=)

•EPON ONU Rugged SFP module

•Battery, 6 amp hour (AIR-1520-BATT-6AH)

•FIPS kit (AIRLAP-FIPSKIT=)

•Optional directional-antenna mounting kit (AIR-ACCAMK-1)

•Lightning Arrestor kit (CGR-LA-NM-NF)

•Third-party lightning arrestors as required by local authorities

	Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
1-24	OL-24247-01