Cisco Systems AIRCAP1552HAK9, 1550 manual Ethernet signal pair 1000BASE-T

Appendix E Access Point Pinouts

Table E-3describes the pin signals for the power injector input connector (To Switch).

Table E-3	Power Injector Input Connector (To Switch) Pinouts
Pin Number		Signal Name
1		Ethernet signal pair (10/100/1000BASE-T)
2
3		Ethernet signal pair 10/100/1000BASE-T)
6
4		Ethernet signal pair (1000BASE-T)
5
7		Ethernet signal pair (1000BASE-T)
8
Shield		Chassis ground

Table E-4describes the RJ-45 pin signals for the power injector output connector (To AP).

Table E-4	Power Injector Output Connector (To AP) Pinouts
Pin Number		Signal Name
1		Ethernet signal pair (10/100/1000BASE-T) and 56 VDC return
2
3		Ethernet signal pair (10/100/1000BASE-T) and 56 VDC (+)
6
4		Ethernet signal pair (1000BASE-T) and 56 VDC (+)
5
7		Ethernet signal pair (1000BASE-T) and 56 VDC return
8
Shield		Chassis ground

Note The power injector output connector (To AP) only supplies 56 VDC power when the Ethernet cable is connected to the 1550 PoE-in connector.

Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide

E-2 OL-24247-01