Chapter 1 Overview

Hardware Features

Figure 1-21 Cisco Aironet 5-GHz 8-dBi Omnidirectional Antenna - Installed Only on Models AIR-CAP1552EU-x-K9 and AIR-CAP1552CU-x-K9

231296

Multiple Power Sources

The 1550 series access point supports these power sources:

AC power—100 to 480 VAC, models 1552E and 1552EU access points, pole-mount configuration

AC power—100 to 277 VAC, model 1552I access point

Power-over-Cable (POC)—40 to 90 VAC, quasi-square wave AC, models 1552C and 1552CU (standard power source for the cable modem configuration)

External 12 VDC

Power-over-Ethernet (PoE)—56 VDC power injector (AIR-PWRINJ1500-2=), only on models 1552E and 1552EU access points

Internal 6 ampere-hour battery backup—only for the 1552E and 1552EUaccess point

Warning Connect the unit only to DC power source that complies with the safety extra-low voltage (SELV) requirements in IEC 60950 based safety standards. Statement 1033

The 1552 access point can be connected to more than one power source. The access point detects the available power sources and switches to the preferred power source using the following default prioritization:

AC power or POC power

External 12-VDC power

Power injector PoE power

Internal battery power

Warning This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. Statement 1028

 

 

Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide

 

 

 

 

 

 

OL-24247-01

 

 

1-21

 

 

 

 

 

Page 39
Image 39
Cisco Systems AIRCAP1552HAK9, 1550 manual Multiple Power Sources