Glossary

I

IEEE

infrastructure

IP address

IP subnet mask

isotropic

Institute of Electrical and Electronic Engineers. A professional society serving electrical engineers through its publications, conferences, and standards development activities. The body responsible for the Ethernet 802.3 and wireless LAN 802.11 specifications.

The wired Ethernet network.

The Internet Protocol (IP) address of a station.

The number used to identify the IP subnetwork, indicating whether the IP address can be recognized on the LAN or if it must be reached through a gateway. This number is expressed in a form similar to an IP address; for example: 255.255.255.0.

An antenna that radiates its signal in a spherical pattern.

M

MAC address

MAP

MBSSID

MIMO

modulation

multipath

multicast packet

Media Access Control address. A unique 48-bit number used in Ethernet data packets to identify an Ethernet device, such as an access point or your client adapter.

Mesh Access Point

Multiple basic SSID. Each multiple basic SSID is assigned a unique MAC address. You use multiple BSSIDs to assign a unique DTIM setting for each SSID and to broadcast SSIDs in beacons (one SSID per beacon).

Multiple Input/Multiple Output

Any of several techniques for combining user information with a transmitter for a carrier signal.

The echoes created as a radio signal bounces off of physical objects.

A single data message (packet) sent to multiple addresses.

O

omni-directional

OFDM

This typically refers to a primarily circular antenna radiation pattern.

Orthogonal frequency division multiplex is a modulation technique used by IEEE 802.11a-compliant wireless LANs for transmission at 6, 9, 12, 18, 24, 36, 48, and 54 Mb/s.

 

Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide

GL-4

OL-24247-01

Page 162
Image 162
Cisco Systems AIRCAP1552HAK9, 1550 manual GL-4