Cisco Systems 1550, AIRCAP1552HAK9 manual Materials Required Kit

Chapter 2 Installing the Access Point

Mounting the Access Point

Table 2-1 Material Needed to Mount the Mounting Bracket to a Vertical Wall

Materials Required		In Kit
• Ground lug and screws (provided with access point)		Yes
• Crimping tool for ground lug, Panduit CT-720 with		No
	CD-720-1 die (http://onlinecatalog.panduit.com)
• Four M8 or 5/16 in. (31 mm) screws		No
• Four wall anchors (specified for wall material)		No
• Drill bit for wall anchors		No
• Electric drill and standard screwdriver		No
•	#6-AWG ground wire	No
• Shielded outdoor-rated Ethernet (CAT5e or better) cable		No
•	Grounding block	No
•	Grounding rod	No
• 13-mm box-end wrench or socket set		No

Caution The mounting surface, attaching screws, and optional wall anchors must be able to support a 50-lb (22.7 kg) static weight.

To mount the access point on a vertical wall, follow these instructions:

Step 1 Use the mounting bracket as a template to mark four screw hole locations on your mounting surface. See Figure 2-7for the mounting bracket screw hole locations. You can optionally use the individual mounting holes or the mounting slots.

	Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
2-16	OL-24247-01