Cisco Systems AIRCAP1552HAK9, 1550 manual 25 1552C Access Point Facing Up in Vault Location

Chapter 2 Installing the Access Point

Mounting the Access Point

Figure 2-25 1552C Access Point Facing Up in Vault Location

1

2

3

1

2

331582

M8 x16 bolt (supplied with pole mount kit) 3 F-connector

M8 x16 bolt (supplied with pole mount kit)

Step 5 Position the two bolts on the access point into the quick mount notches on each side of the mounting bracket (see Figure 2-23). Ensure that the hinged door is facing out.

Step 6 Screw a M8 x16 bolt (with flat and lock washers) into the second bolt hole on each side of the access point.

Step 7 Ensure that the front of the access point is vertical, and tighten the four bolts to 13 to 15 ft lbs (17.6 to 20.3 Nm).

Step 8 For the 1552CU access point, continue with Installing Antennas, page 2-36. For the 1552C access point, continue with Powering the Access Point, page 2-45.

	Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01		2-35