Cisco Systems 1550, AIRCAP1552HAK9 manual AIR-ANT5114P2M-N AIR-ANT2413P2M-N

Chapter 2 Installing the Access Point

Installing Antennas

The AIR-CAP1552E-x-K9 model can be operated in either of the configurations shown below. In addition, it can be operated with one directional antenna installed for one frequency band and three omnidirectional “stick” antennas installed for the other frequency band.

Figure 2-30 AIR-CAP1552EU-x-K9

1

1 1 1

5 GHz

2

2.4 GHz

2 2 2

345763

345741

1

2

AIR-ANT5180V-N

AIR-ANT2450V-N or AIR-ANT2480V-N

1

2

AIR-ANT5114P2M-N

AIR-ANT2413P2M-N

The AIR-CAP1552CU-x-K9 model can be operated with the same configurations as the AIR-CAP1552EU-x-K9 model on a pole mount configuration, as shown in Figure 2-30. In addition, when installed in a cable strand mount configuration, the AIR-CAP1552CU-x-K9 model can be operated with configuration shown in Figure 2-31.

Figure 2-31 AIR-CAP1552CU-x-K9

1

345761 1

2

5-GHz antenna AIR-ANT5140V-N 2 2.4-GHz antenna AIR-ANT2420V-N

	Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
2-40	OL-24247-01