Cisco Systems AIRCAP1552HAK9, 1550 manual Attach the Cable Strand to the Cable Mount Brackets

Chapter 2 Installing the Access Point

Mounting the Access Point

Step 3 Place the clamp bracket on the strand support cable (see Figure 2-19). On each cable support bolt, ensure that one cable clamp is placed on each side of the support cable. Tighten the two M8 flange nuts to 13 to 15 in. lbs (17.6 to 20.3 Nm). Ensure the cable is mounted to the bottom side of the access point.

Figure 2-19 Attach the Cable Strand to the Cable Mount Brackets

1

2

1

3

255246

	4	5
1	Strap bracket assemblies		4	Antenna unit assembly (shown with the Low
				Profile Dual-Band 2.4/5 GHz Omni Antenna
				Array)
2	Strand support cable		5	F-Connector Adapter (for Cable Modem
				models only); sometimes referred to as a
				“stringer”
3	Fiber or Cable bundle

	Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01		2-29