Cisco Systems AIRCAP1552HAK9, 1550 manual Pole Mount Installation

Chapter 2 Installing the Access Point

Installation Guidelines

series of standards. To meet CAN/CSA-C22.2 No. 60950-22-07/UL60950-22 requirements, the installer may use alternative components to provide this additional protection. Those components may comply with ANSI/IEEE C62.11, CSA Certification Notice No. 516, CSA C22.2 No. 1, or UL 1449. Suitability of the components for the application must be determined for the intended installation. (For example, some devices are suitable for installation on the load side of the service entrance only, and some are suitable for use with cord-connected equipment only.)

Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074

Figure 2-2 Pole Mount Installation

1

1

2

3

5

255239

4 4

4

1	Stainless steel mounting straps	4	Cisco Aironet Dual-Band Omnidirectional
	(part of pole mount kit)		Antennas. The dual-band antenna covers both
			the 2.4 GHz and 5 GHz bands.
2	Pole (wood, metal, or fiberglass)	5	1552 series access point model
	2 to 16 in. (5.1 to 40.6 cm) diameter		AIR-CAP1552E-x-K9
3	Mounting bracket (part of pole mount kit)

	Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01		2-11