Pole Installation Hardware and Tools

Chapter 2 Installing the Access Point

Tools and Hardware

–4-ft (1.2-m) streetlight power tap adapter (AIR-PWR-ST-LT-R3P=) for light pole installations in the US and Canada

•Antennas, 2.4/5-GHz (refer to the “Antenna Configurations” section on page 1-13)

•Optional battery backup unit (AIR-1520-BATT-6AH=)—Used only on models 1552E and 1552EU

•FIPS kit (AIRLAP-FIPSKIT=)

•1000BASELX single-mode Rugged SFP (GLC-LX-SM-RGD=)

•1000BASESX multimode Rugged SFP (GLC-SX-MM-RGD=)

•EPON ONU Rugged SFP module

•Optional pole mount kit (AIR-ACCPMK1550=)

•Optional strand mount kit (AIR-ACCSMK1550=)

•Optional banding strap tool (BAND IT) (AIR-BAND-INST-TL=)

•Optional directional-antenna mounting kit (AIR-ACCAMK-1)

•Lightning Arrestor kit (CGR-LA-NM-NF)

•Third-party lightning arrestors as required by local authorities

Optional Tools and Hardware That You Supply

Tools and materials that are user-supplied are:

•Ground lug crimping tool (Panduit CT-720 with CD-720-1 die)

•6-AWG copper ground wire

•13 mm box-end wrench or socket set

•Adjustable wrench, 22 mm socket, or Sealcon S-2200-WR socket wrench

•#8 Torx screwdriver

•Small flat screwdriver for DC power connector

•Optional shielded outdoor-rated Ethernet (CAT5e or better) cable with 0.20 to 0.35 in (0.51 to 0.89 cm) diameter

•Optional Ethernet RJ-45 connector and installation tool

•Optional shielded outdoor-rated DC power cable with 0.20 to 0.35 inch (.0.51 to 0.89 cm) diameter

•Optional cable F-connector adapter (stinger)

•Optional ground rod, as required by local regulations

•Optional ladder, power lift, rope, or other tools as required

To install the access point on a vertical or horizontal metal, wood, or fiberglass pole, you need the following additional hardware and tools:

•Pole mount kit (AIR-ACCPMK1550=)

–Pole clamp bracket

–Two gusset strap brackets

Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide

	OL-24247-01	2-3