Cisco Systems AIRCAP1552HAK9, 1550 manual Antenna Mounting Options

Chapter 2 Installing the Access Point

Installing Antennas

Figure 2-27 Antenna Port Locations - Models AIR-CAP1552CU-x-K9 and AIR-CAP1552EU-x-K9

3 2 1

			345674
	6	5	4
1	Antenna port 3 - Type N connector (with cap)	4	Antenna port 6 - Type N connector (with cap)
2	Antenna port 2 - Type N connector (with cap)	5	Antenna port 5 - Type N connector (with cap)
3	Antenna port 1 - Type N connector (with cap)	6	Antenna port 4 - Type N connector (with cap)

Antenna Mounting Options

Two mounting configurations are available, the cable strand mount and the pole mount (refer to “Mounting the Access Point” section on page 2-14.)

Using an optional antenna mounting bracket kit, the directional antennas AIR-ANT2413P2M-N and AIR-ANT5114P2M-N can be mounted directly on an access point in a strand mount or pole mount environment. The antenna bracket kit contains four bracket sections and fasteners that you can assemble in multiple configurations to position and aim the directional antenna in a range of positions. For more information on mounting the antenna with the optional mounting bracket, refer to Installing Directional-Antenna Mounting Kits on Cisco 1550 Series Outdoor Mesh Access Points.

Figure 2-28through Figure 2-31show the antenna mounting options supported by the various 1552 access point models.

	Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
2-38	OL-24247-01