18-11
Cisco ME 3400 EthernetAccess Switch SoftwareConfiguration Guide
78-17058-01
Chapter18 Configuring DHCP Feat ures and IP Source Guard Configuring DHCP Features
To disable DHCP snooping, use the no ip dhcp snooping global configuration command. To disable
DHCP snooping on a VLAN or range of VLANs, use the no ip dhcp snooping vlan vlan-range global
configuration command. To disable the insertion and removal of the option-82 field, use the no ip dhcp
snooping information option global configuration command. To configure an aggregation switch to
drop incoming DHCP snooping packets with option-82 information from an edge switch, use th e no ip
dhcp snooping information option allowed-untrusted global configuration command.
This example shows how to enable DHCP snooping globally and on VLAN 10 and to configure a rate
limit of 100 packets per second on a port:
Switch(config)# ip dhcp snooping
Switch(config)# ip dhcp snooping vlan 10
Switch(config)# ip dhcp snooping information option
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# ip dhcp snooping limit rate 100
Enabling DHCP Snooping on Private VLANs
You can enable DHCP snooping on private VLANs. If DHCP snooping is enabled, the configuration is
propagated to both a primary VLAN and its associated secondary VLANs. If DHC P snooping is enabled
on the primary VLAN, it is also configured on the secondar y VL AN s.
If DHCP snooping is already configured on the primary VLAN and you configure DHCP sn ooping with
different settings on a secondary VLAN, the configuration for the secondary VLAN does not take e ffect.
You must configure DHCP snooping on the primary VLAN. If DHCP snooping is not configured on the
primary VLAN, this message appears when you are configuring DHCP snooping on the secondary
VLAN, such as VLAN 200:
2w5d:%DHCP_SNOOPING-4-DHCP_SNOOPING_PVLAN_WARNING:DHCP Snooping configuration may not take
effect on secondary vlan 200. DHCP Snooping configuration on secondary vlan is derived
from its primary vlan.
The show ip dhcp snooping privileged EXEC command output shows all VLANs, including primary
and secondary private VLANs, on which DHCP snooping is enabled.
Step13 show running-config Verify your entries.
Step14 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose