B-31
Cisco ME 3400 EthernetAccess Switch SoftwareConfiguration Guide
78-17058-01
AppendixB Working with the Cisco IOS File System, Configuration Files, and Software Images Working with Software Images
The algorithm installs the downloaded image onto the system board flash device (flash:). The imag e is
placed into a new directory named with the software versio n strin g, and the B OO T en vi ronmen t v ariable
is updated to point to the newly installed image.
If you kept the old software during the download process (you specified the /leave-old-sw keyword), you
can remove it by entering the delete /force /recursive filesystem:/file-url privileged EXEC command.
For filesystem, use flash: for the system board flash device. For file-url, enter the directory name of the
old software image. All the files in the directory and the direc tor y are removed.
Caution For the download and upload algorithms to operate properly, do not rename image names.
Uploading an Image File By Using RCP
You can upload an image from the switch to an RCP server. You can later download this image to the
same switch or to another switch of the same type.
The upload feature should be used only if the web ma nage ment p ages assoc iat ed w it h the e mbedd ed
device manager have been installed with the existing image.
Beginning in privileged EXEC mode, follow these steps to upload an image to an RCP server:
Command Purpose
Step1 Verify that the RCP server is properly configured by
referring to the “Preparing to Download or Upload an Image
File By Using RCP” section on page B-28.
Step2 Log into the switch through the console port or a Telnet
session.
Step3 configure terminal Enter global configuration mode.
This step is required only if you override the default remote
username (see Steps 4 and 5).
Step4 ip rcmd remote-us er na m e username (Optional) Specify the remote username.
Step5 end Return to privileged EXEC mode.
Step6 archive upload-sw
rcp:[[[//[username@]location]/directory]/image-na
me.tar]
Upload the currently running switch image to the RCP
server.
•For //username, specify the username; for the RCP copy
request to execute, an account must be defined on the
network server for the remote username. For more
information, see the “Preparing to Download or Upl oad
an Image File By Using RCP” section on pageB-28.
•For @location, specify the IP address of the RCP server.
•For /directory]/image-name.tar, specify the directory
(optional) and the name of the software image to be
uploaded. Directory and image names are case se nsiti ve.
•The image-name.tar is the name of software image to be
stored on the server.