32-41
Cisco ME 3400 EthernetAccess Switch SoftwareConfiguration Guide
78-17058-01
Chapter32 Configuring IP Unicast Routing Configuring BGP
BGP confederation identifier/peers •Identifier: None configured.
•Peers: None identified.
BGP Fast external fallover Enabled.
BGP local preference 100. The range is 0 to 4294967295 with the higher value preferred.
BGP network None specified; no backdoor route advertised.
BGP route dampening Disabled by default. When enabled:
•Half-life is 15 minutes.
•Re-use is 750 (10-second increments).
•Suppress is 2000 (10-second increments).
•Max-suppress-time is 4 times half-life; 60 minutes.
BGP router ID The IP address of a loopback interface if one is configured or the highest IP address
configured for a physical interface on the router.
Default information originate
(protocol or network redistribution) Disabled.
Default metric Built-in, automatic metric translations.
Distance •External route administrative distance: 20 (acceptable values are fr om 1 to 255) .
•Internal route administrative distance: 200 (acceptable values are from 1 to 255).
•Local route administrative distance: 200 (acceptable values are from 1 to 255).
Distribute list •In (filter networks received in updates): Disabled.
•Out (suppress networks from being advertised in updates): Disabled.
Internal route redistribution Disabled.
IP prefix list None defined.
Multi exit discriminator (MED) •Always compare: Disabled. Does not compare MEDs for paths from neighbors in
different autonomous systems.
•Best path compare: Disabled.
•MED missing as worst path: Disabled.
•Deterministic MED comparison is disa ble d.
Table32-9 Default BGP Configuration (continued)
Feature Default Setting