33-4
Cisco ME 3400 EthernetAccess Switch SoftwareConfiguration Guide
78-17058-01
Chapter33 Configuring HSRP
Configuring HSRP
Figure 33-2 MHSRP Load Sharing
Configuring HSRP
These sections contain this configuration information:
•Default HSRP Configuration, page 33-4
•HSRP Configuration Guidelines, page 33-5
•Enabling HSRP, page 33-5
•Configuring HSRP Priority, page 33-6
•Configuring MHSRP, page 33-9
•Configuring HSRP Authentication and Timers, page 33-9
•Enabling HSRP Support for ICMP Redirect Messages, page 33-11

Default HSRP Configuration

Table33-1 shows the de fault H SRP co nfiguration.
121235
Active router for group 1
Standby router for group 2
Client 1
Router A Router B
10.0.0.1 10.0.0.2
Active router for group 2
Standby router for group 1
Client 2 Client 3 Client 4
Table33-1 Default HSRP Configuration
Feature Default Setting
HSRP groups None configured
Standby group number 0
Standby MAC address System assigned as: 0000.0c07.acXX, where XX is the HSRP
group number
Standby priority 100