Index
IN-35
Cisco ME 3400 EthernetAccess Switch SoftwareConfiguration Guide
78-17058-01
statistics
IEEE 802.1x 8-19
CDP 22-5
interface 9-23
IP multicast routing 34-34
OSPF 32-31
RMON group Ethernet 25-6
RMON group history 25-5
SNMP input and output 27-16
sticky learning 21-9
storm control
configuring 21-3
described 21-1
disabling 21-5
displaying 21-17
support for 1-2
thresholds 21-1
STP
BPDU filtering
described 16-3
disabling 16-8
enabling 16-7
BPDU guard
described 16-2
disabling 16-7
enabling 16-6
BPDU message exchange 14-3
configuration guidelines 14-12, 16-5
configuring
forward-delay time 14-21
hello time 14-20
maximum aging time 14-21
path cost 14-18
port priority 14-16
root switch 14-14
secondary root switch 14-16
spanning-tree mode 14-13
switch priority 14-19
counters, clearing 14-22
STP (continued)
default configuration 14-11
default optional feature configuration 16-5
designated port, defined 14-4
designated switch, defined 14-4
disabling 14-14
displaying status 14-22
EtherChannel guard
described 16-3
disabling 16-9
enabling 16-8
extended system ID
effects on root switch 14-14
effects on the secondary root switch 14-16
overview 14-4
unexpected behavior 14-15
features supported 1-4
IEEE 802.1D and bridge ID 14-4
IEEE 802.1D and multicast addresses 14-8
IEEE 802.1t and VLAN identifier 14-4
inferior BPDU 14-3
instances supported 14-10
interface state, blocking to forwarding 16-2
interface states
blocking 14-6
disabled 14-7
forwarding 14-6, 14-7
learning 14-6
listening 14-6
overview 14-4
interoperability and compatibility among modes 14-10
keepalive messages 14-3
Layer 2 protocol tunneling 13-8
limitations with 802.1Q trunks 14-10
load sharing
overview 11-19
using path costs 11-21
using port priorities 11-20