Chapter 4 Troubleshooting the Installation
Troubleshooting the Cooling Subsystem
clearance (at least 6 inches, 15.24 cm) around all sides of the chassis to allow cooling air to enter and hot air to exhaust. Should an overtemperature condition occur at initial startup:
–Check the condition of the air filter. If the air filter appears dirty, you should remove the air filter and replace it; or remove the air filter, take it away from the chassis, and vacuum the air filter.
–The overtemperature condition message could also indicate a faulty component or temperature sensor. Before the system shuts down, use the show environment all or show environment table commands to view the internal system environment including voltages and temperatures measured at each card.
If you are still unable to resolve the problem, contact a service representative for assistance.
|
| Cisco XR 12404 Router Installation Guide |
|
|
|
|
| ||
|
|
|
| |
|
|
|
