Cisco Systems XR 12404 manual Specifications, Nebs

Appendix A Technical Specifications

Product Architecture

Table A-1 Cisco XR 12404 Router Product Architecture (continued)

Feature	Description
Power	110V AC power, sufficient to manage three OC-192c/10GE
Requirements	capable line cards and one 10G capable RP.
	Total power supplied to the system should not exceed
	1200VA
	Two AC or DC power supplies in redundant configuration
	should be able to support the entire power needs of the
	chassis.
Power Supply	Redundant and load sharing AC power entry module (PEMs),
Redundancy	or
	Redundant and load sharing DC PEMs and DC power
	distribution units (PDUs)
Route	Supports up to 2 RPs per system
Processors	The second RP can be used in any slot1
	The first RP is inserted in slot 0 (1.25 inch height)
Route	Supports online insertion and removal, hot swappable
Processor	RP redundancy
Redundancy
Switch Fabric	The switch fabric supports up to 80 Gbps of capacity
NEBS	The Cisco 12404 Inernet Router is designed to comply with
	NEBS Level 3 certification

1.A narrow card filler panel must be used to ensure proper air flow through the chassis and electromagnetic compatibility (EMC)

Specifications

Table A-2lists Cisco XR 12404 Router physical specifications. Table A-3lists the environmental specifications.

	Cisco XR 12404 Router Installation Guide
OL-13830-02		A-3