Chapter 5 Maintaining the Router
Removing and Installing the Front Cover
Step 4 Remove the bumpers and pivot blocks from the cover as shown in Figure
Figure 5-3 Removing the Bumpers and Pivot Blocks
2
1
149469
1
Bumpers | 2 | Pivot Blocks |
|
|
|
Step 5 Reinstall the hardware to the opposite sides of the front cover:
a.Mount pivot blocks to the left side and tighten the screws until snug.
b.Mount the bumpers to the right side and tighten the screws until snug.
| Cisco XR 12404 Router Installation Guide |
|