Cisco Systems XR 12404 Transporting a Cisco XR 12000 Series Router, Site Preparation Checklist

Chapter 2 Preparing for Installation

Transporting a Cisco XR 12000 Series Router

If you do not receive everything you ordered, contact a customer service representative for assistance. See the section titled, “Obtaining Documentation, Obtaining Support, and Security Guidelines” section on page -xii.

Transporting a Cisco XR 12000 Series Router

The shipping package for Cisco XR 12000 Series Routers is engineered to reduce the potential of product damage associated with routine material handling experienced during shipment. To minimize potential damage to the product, transport these products in their Cisco-specified packaging. Failure to do so may result in damage to the router or degradation of its performance. Also, do not remove the Internet router from its shipping container until you are ready to install it. The router should always be transported or stored in an upright position. Keep the router in the shipping container until you have determined a location for installation.

Site Preparation Checklist

Your Cisco XR 12404 Router is shipped with a site log(Table 2-1). Keep your site log in a location near the router where anyone who performs tasks can have access to it. Site log entries might include the following.

•Installation Progress—Make entries in the site log to record installation progress. You can note any difficulties encountered and remedies during the installation process.

•Upgrades, Removals, and Replacement Procedures—Use the site log as a record of system maintenance and expansion history.

–FRU installed, removed, or replaced

–Cisco XR 12404 Router configuration changes

–Software upgrades

–Corrective or preventive maintenance procedures performed

–Intermittent problems

–Your comments

	Cisco XR 12404 Router Installation Guide
OL-13830-02		2-17