Recover Time
From… To
State
Enter a time, in seconds that a port will have to wait before being recovered from a Loopback Detection shutdown. The user may set a time between 60 and 1000000 seconds with a default setting of 60 seconds. The user may also enter a time of 0 which means that the port can only be recovered manually by the user. This is done by going to the Port Configuration folder located in the Administration folder and manually enabling these ports using the Port Settings window.
Choose a port or group of ports that are to be enabled for the Loopback Detection function.
Use the
Click Apply to implement changes made.
108
