DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual

Multicast Forwarding

The following figure and table describes how to set up Multicast Forwarding on the Switch. To view this window click Administration > Forwarding & Filtering > Multicast Forwarding

Figure 6- 57. Static Multicast Forwarding Settings and Current Multicast Forwarding Entries window

The Static Multicast Forwarding Settings page displays all of the entries made into the Switch's static multicast forwarding table. Click the Add button to open the Setup Static Multicast Forwarding Table, as shown below:

Figure 6- 58. Setup Static Multicast Forwarding Table - Add

The following parameters can be set:

ParameterDescription

VID

Multicast MAC Address

Port Settings

The VLAN ID of the VLAN to which the corresponding MAC address belongs.

The MAC address of the static source of multicast packets. This must be a multicast MAC address.

Allows the selection of ports that will be members of the static multicast group. The options are:

None - No restrictions on the port dynamically joining the multicast group. When None is chosen, the port will not be a member of the Static Multicast Group.

Egress - The port is a static member of the multicast group.

Click Apply to implement the changes made. To delete an entry in the Static Multicast Forwarding Table, click the corresponding under the Delete heading. Click the Show All Multicast Forwarding Entries link to return to the Static Multicast Forwarding Settings window.

73

Page 86
Image 86
D-Link DES-3018 manual Multicast Forwarding, Multicast MAC Address Port Settings