SNMP Trap Settings
The following window is used to enable and disable trap settings for the SNMP function on the Switch. To view this window, click Administration > SNMP Manager > SNMP Trap Settings
Figure 6- 20. SNMP Trap Settings window
To enable or disable the Traps State and/or the Authenticate Traps State, use the corresponding
SNMP User Table
The SNMP User Table displays all of the currently configured SNMP Users on the Switch. To view this window, click Administration > SNMP Manager > SNMP User Table
Figure 6- 21. SNMP User Table
To delete an existing SNMP User Table entry, click the 
below the Delete heading corresponding to the entry you wish to delete.
To display the detailed entry for a given user, click on the hyperlinked User Name. This will open the SNMP User Table Display page, as shown below.
Figure 6- 22. SNMP User Table Display
The following parameters are displayed:
ParameterDescription
User Name
An alphanumeric string of up to 32 characters. This is used to identify the SNMP users.
47
