![](/images/new-backgrounds/1191608/191608271x1.webp)
Figure 9- 2. CPU Interface Filtering Table
To add an entry to the CPU Interface Filtering Table, click the Add button. This will open the CPU Interface Filtering Configuration page, as shown below. There are three Access Profile Configuration pages; one for Ethernet (or MAC
Figure 9- 3. CPU Interface Filtering Configuration window – Ethernet
Parameter | Description | |
| Type in a unique identifier number for this profile set. This value can be set from 1 - 3. | |
Profile ID | ||
| Select profile based on Ethernet (MAC Address), IP address or packet content mask. This | |
Type | ||
| will change the menu according to the requirements for the type of profile. | |
| • | Select Ethernet to instruct the Switch to examine the layer 2 part of each packet |
|
| header. |
| • | Select IP to instruct the Switch to examine the IP address in each frame's header. |
| • | Select Packet Content Mask to specify a mask to hide the content of the packet |
|
| header. |
| Selecting this option instructs the Switch to examine the VLAN identifier of each packet | |
VLAN | ||
| header and use this as the full or partial criterion for forwarding. | |
| Source MAC Mask - Enter a MAC address mask for the source MAC address. | |
Source MAC | ||
| Destination MAC Mask - Enter a MAC address mask for the destination MAC address. | |
Destination MAC | ||
| Selecting this option instructs the Switch to examine the 802.1p type value in each frame's | |
802.1p | ||
|
| 123 |
|
|