D-Link DES-3018 manual SSH Server Configuration

DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual

SSH Server Configuration

The following window is used to configure and view settings for the SSH server and can be opened by clicking Security > SSH > SSH Server Configuration

Figure 10- 26. SSH Server Configuration and SSH Server Configuration Settings window

To configure the SSH server on the Switch, modify the following parameters and click Apply:

ParameterDescription

SSH Server Status	Use the pull-down menu to enable or disable SSH on the Switch. The default is Disabled.
	Enter a value between 1 and 8 to set the number of users that may simultaneously access
Max Session (1-8)
	the Switch. The default setting is 8.
Connection TimeOut	Allows the user to set the connection timeout. The use may set a time between 120 and 600
(120-600)	seconds. The default setting is 120 seconds.
Auth. Fail (2-20)	Allows the Administrator to set the maximum number of attempts that a user may try to log
	on to the SSH Server utilizing the SSH authentication. After the maximum number of
	attempts has been exceeded, the Switch will be disconnected and the user must reconnect
	to the Switch to attempt another login. The number of maximum attempts may be set
	between 2 and 20. The default setting is 2.
	This field is used to set the time period that the Switch will change the security shell
Session Rekeying
	encryptions by using the pull-down menu. The available options are Never, 10 min, 30 min,
	and 60 min. The default setting is Never.
	Enter the virtual port number to be used with this feature. The common port number for SSH
Listened Port
Number	is 22.

160