
For information about segmenting hubs using the network management mod- ule for the hub, see the ub Stack Management: Controlling Hubs in the Hub Stack” section later in this chapter.
NOTE: | Hub segmentation is controlled by the master |
| hub. When the master hub completes its ini- |
| tialization, it will restore any prior segmentation |
| of the hubs. Therefore, if you are using a |
| switch or bridge to join different segments, be |
| sure to enable the IEEE 803.1d Spanning Tree |
| Protocol to prevent temporary network loops |
|
|
|
|
Logging in to the Hub Console
The
Logging In
When you first connect to the hub, it will display the login screen:
Master Hub Setup and Management | 41 |