Dual-Speed Stackable Hub Web-based Management User’s Guide

The fields are described as follows:

Software Update Mode Set to either network or out-of-band. Deter- mines whether the configuration file should be obtained through the Ethernet network or through the console port.

Software Update Control Determines whether or not the Hub should download its configuration file the next time the Hub is booted.

Boot File The path and configuration file name on the TFTP server. If you are using bootp-tftp mode, or if Get IP From BOOTP Server is en- abled, the pathname will be obtained from the BOOTP server.

Boot Server Address The IP address of the TFTP server where the configuration file is located.

Boot Protocol Set to either bootp-tftp or tftp only. Applies only if the Software Update Control is enabled.

Get IP From Bootp Server If enabled, the IP address will be obtained from the BOOTP server.

78

Web-based Network Management

Page 90
Image 90
D-Link DFE-2600 manual Web-based Network Management